Hello!
I'm trying to deploy an ISR-WAAS in our China's branch, but i'm getting following error:
Only one WAAS image found locally (harddisk:/ISR-WAAS-5.3.5b.14.ova) - using as default
Extracting profiles from harddisk:/ISR-WAAS-5.3.5b.14.ova, this may take a couple of minutes ...
Failed to match exact application name
This is the 1st ISR-WAAS deployment (others are inline appliances), so maybe I'm doing something wrong.
RTCNCZX022#sh virtual-service
Virtual Service Global State and Virtualization Limits:
Infrastructure version : 1.6
Total virtual services installed : 0
Total virtual services activated : 0
Machine types supported : KVM, LXC
Machine types disabled : none
Maximum VCPUs per virtual service : 6
Resource virtualization limits:
Name Quota Committed Available
--------------------------------------------------------------
system CPU (%) 75 0 75
memory (MB) 10240 0 10240
bootflash (MB) 1000 0 1000
harddisk (MB) 20000 0 18235
volume-group (MB) 190768 0 170288
System image file is "bootflash:isr4300-universalk9.03.15.04.S.155-2.S4-std.SPA.bin"
Last reload reason: Reload Command
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx appxk9 Permanent appxk9
uc uck9 Permanent uck9
security securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4351/K9 (2RU) processor with 7809729K/6147K bytes of memory.
Processor board ID xxxxxxxxxxxxxxxxxxxxxx
3 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
13807615K bytes of flash memory at bootflash:.
20971520K bytes of SATA hard disk at harddisk:.
30497632K bytes of USB flash at usb0:.
Any idea?
It is a single router in a remote branch, so I was planning to deploy as
ISR-WAAS at a Single-Router Remote Site—Configured Using EZConfig
Following this design guide:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2014/CVD-ApplicationOptimizationUsingCiscoISR-WAASDesignGuide-AUG14.pdf
Chosen version 5.3.5b because it is the same we are running on all the others.
Didn't configured the SRV and DNS entries for WCM, as design guide stated that WCM could be set manually during the OVA istallation proccess.
THanks in advance
:)
