Load Image onto CSS11052

[abarnard]

I have a CSS 11052 switch ahd the image has been erased from the hard disk.

Can anyone help me to get the image back onto the switch?

Thanks

[b.speltz]

I understand that the image has been erased from the flash from your comments. The CSS switch contains two flash images on each unit. One image is referred to as the operational FLASH image and the other is referred to as the locked FLASH image. The locked FLASH image provides a recovery path if the operational flash gets corrupted. The switch will boot from the locked flash until a new .adi file is loaded into the operational flash.

http://www.cisco.com/warp/public/117/cssflash.html

Here's the link to the boot procedure:

http://www.cisco.com/warp/public/117/cssflash.html

[abarnard]

Thanks for your help.