Necessito de informações sobre quais parametros de configuração no ASA Version 8.2(2)12, e necessario para habilitar o trafego otimizado WAAS.
Obrigado.
Solved! Go to Solution.
Hi Jorge,
I'll answer in English if you don't mind.
By default, the ASA clears the WAAS TCP option.
To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.
I wrote a document some time ago that explain this:
https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after
Regards,
Nicolas
Hi Jorge,
I'll answer in English if you don't mind.
By default, the ASA clears the WAAS TCP option.
To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.
I wrote a document some time ago that explain this:
https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after
Regards,
Nicolas
Hi Nicolas,
This document has the information I need, thank you.
Regards,
Jorge