Dear all,I have a reverse proxy that makes HTTP and HTTPS requests to an ACE.For implement persistence I want to configure HTTP HEADER Stickyness using the X-Forwarder-For information but I don't know:How to implement it ( I'l apreciate a little exam...
Hello,I'm trying to set up a load balancer within an OVH (hoster) infrastrcture, I've followed their instructions http://guide.ovh.com/VrackLoadBalancingACESimple (french written)I'm using a RIPE block (5.135.193.xxx/28) and would like the first 8 (5...
HelloWe had disk00 failed on a WAE-674 WAAS appliance. The software image was completely gone and all of the paritions along with it. I was told if you lose disk00, the image gets wiped out. Is this correct? If so, can someone please explain why it's...
HelloThe CM is reporting this alarm for 2 674s in the same remote location. We confirmed with the local admin that the power supplies are connected and green light is on. If you do a "show hardware", the following outputs show the power supplies are ...
Hi i am wondering if a GSS is capable of reverse lookups as there only seems to be A records for the vip but no option to create a ptr record.ThanksKev
I'm receiving this error on a WAVE-574 appliance. The primary interface is configured and I can ping between the wave and the central manager. Any ideas?
Hi Upgrading the ACE to A5_2_1.I am currently on A4_2_0Cant see any problems on the notes but it is a big leapJust wondered if anyone knows of any issues as its the first time i have upgraded the ACEKind RegardsSteve
Hi all,I have a issue with a ACE configuration which terminate https traffic and load balance the client request to the real servers.All working fine, with one exception. If the client requests for the URL "https://www.myservice.com/content/" the con...
HiI'm hoping someone can clarify support of the mtrace command in NX-OS.I've got a mixture of IOS and NX-OS devices running multicast in our network and when running mtrace on the IOS devices (6500s) everything is fine. However when I run mtrace on t...
Hello,We installed a WAAS 574 (IOS 5.0.3) inline between a switch and a router.It's a Giga switch and Fast router.What does Cisco advice to do in this situation ??We set all the ports (Switch, WAAS inlinegroup, Router) to 100M Full to avoid speed dif...
Hi all,We have a number of WAAS express modules deployed with a central manager. We have rolled out WAAS at another remote site and are using an identical config to the other sites and have registered to the CM fine, but am getting the following mess...
This document is recommending, for a 6500 with Sup720 PFC 3B, Layer2 redirection and return:http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-629052.html Question: Is this best practice for return...
Hi All,We have a pair of ACE4710s and I am seeing some odd behaviour when adding a new server to a server farm. What appears to be happening is that when a new server is added to a farm set with Round Robin as it's predictor, it appears to be operati...
