cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
651
Views
0
Helpful
2
Replies
Highlighted
Beginner

Parametros no ASA Version 8.2(2)12 para trafego WAAS

Necessito de informações sobre quais parametros de configuração no ASA Version 8.2(2)12, e necessario para habilitar o trafego otimizado WAAS.

Obrigado.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Jorge,

I'll answer in English if you don't mind.

By default, the ASA clears the WAAS TCP option.

To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.

I wrote a document some time ago that explain this:

https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after

Regards,

Nicolas

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Hi Jorge,

I'll answer in English if you don't mind.

By default, the ASA clears the WAAS TCP option.

To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.

I wrote a document some time ago that explain this:

https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after

Regards,

Nicolas

View solution in original post

Highlighted

Hi Nicolas,

This document has the information I need, thank you.

Regards,

Jorge

Content for Community-Ad