Redirect to the same VIP

[fabrice.demierre]

Hi

I need to redirect a page to the same VIP. Followed the instructions on the URL link below: http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a00801c65b5.shtml

Still don't know how to create a content rule to accept the new page.

Can someone help, please?

Thanks,

Fabrice

[rob]

Define a service for your server(s)

define a content rule

content XXXX

add service xxxx

url "/*" (what you want redirecting)

protocol tcp

port 80

redirect "http://www.cisco.com/index.html"

( where it should be re-redirected to....

This is how I got it working without the use of a VIP but then in my scenario Im not load balancing across muliple boxes

If this doesnt help you send me your config and ill take a look for you

Cheers

[fabrice.demierre]

Hi. Thanks for your reply.

First I created the same content rule as mentioned above but it still doesn't work.

Then I created two differents rules which go directly in loop:

content Redirect

add service test1

add service test2

vip address 192.168.72.12

protocol tcp

port 80

active

content Redirect-1

vip address 192.168.72.12

redirect "/exchange"

protocol tcp

port 80

url "/*"

active

Do you have an idea what's wrong?

Thanks again

Cheers

[Gilles Dufour · Accepted solution]

the problem is that url "/*" will catch everything including /exchange.

so when you connect back to /exchange it goes back to the same redirect-1

for your main content rule (no-redirect) use the same config and the following url command :

url "/exchange*"

Regards,

Gilles.

[fabrice.demierre]

Dear Gilles

It works!

Thanks a lot

Bonne soirée

Fabrice