Hello everyone,
I've been detect a problem on a WAE-7371-K9 on its DISK00.
==================================================================================================
WAE-7371-K9#show disks details
RAID Physical disk information:
disk00: Defunct
disk01: Online J0V9K9KM 286102 MB
disk02: Online J0V9KBRM 286102 MB
disk03: Online J0V95N3M 286102 MB
disk04: Online J0V9VPJM 286102 MB
disk05: Online J0V9VYRM 286102 MB
RAID Logical drive information:
raid-disk: RAID-5 Critical 1430000 MB
Enabled (read-cache) Enabled (write-back)
==================================================================================================
I will replace this Disk to another but I have no sure if the New Disk that I will replace is correctly formated.
My question is:
The RAID-5 will automatically install the new disk and format it or I need to format the new disk before I install in my WAE-7371-K9.
I have been learned how do that in Links below, but I still have some doubts.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/installation/7341-7371/guide/7300op2.html
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v411/configuration/guide/maint.html#wp1144150
Regards.
Eder.
