05-29-2013 01:25 PM
Hello everyone,
I've been detect a problem on a WAE-7371-K9 on its DISK00.
==================================================================================================
WAE-7371-K9#show disks details
RAID Physical disk information:
disk00: Defunct
disk01: Online J0V9K9KM 286102 MB
disk02: Online J0V9KBRM 286102 MB
disk03: Online J0V95N3M 286102 MB
disk04: Online J0V9VPJM 286102 MB
disk05: Online J0V9VYRM 286102 MB
RAID Logical drive information:
raid-disk: RAID-5 Critical 1430000 MB
Enabled (read-cache) Enabled (write-back)
==================================================================================================
I will replace this Disk to another but I have no sure if the New Disk that I will replace is correctly formated.
My question is:
The RAID-5 will automatically install the new disk and format it or I need to format the new disk before I install in my WAE-7371-K9.
I have been learned how do that in Links below, but I still have some doubts.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/installation/7341-7371/guide/7300op2.html
Regards.
Eder.
Solved! Go to Solution.
05-29-2013 06:26 PM
Hi Eder,
Raid-5 will automatically install new disk no need for formatting first.
05-29-2013 06:26 PM
Hi Eder,
Raid-5 will automatically install new disk no need for formatting first.
06-06-2013 12:58 PM
Thank's a lot Gauray, I will do it!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide