05-04-2007 12:40 AM
Hi,
I have the following problem, i'm trying to add u virtual router to my content switch.
circuit VLAN89
ip address 195.177.246.121 255.255.255.128
ip virtual-router 111
ip redundant-vip 111 195.177.246.57
when i try to do this i'm getting the error could not find content rule or group for specified VIP. I then first try to create a content rule with this vip.
content ecms.railaccess.be
vip address 195.177.246.57
redundant-index 173
balance leastconn
add service proatriu0po21a0
add service problock0po22a0
advanced-balance sticky-srcip
sticky-inact-timeout 30
protocol tcp
port 52994
url "//ecms.railaccess.be/*"
active
When i try to do this i get the error:
VIP address needs to be associated with a virtual router.
What am i doing wrong?
Kind regards,
Frederik De Muyter.
Solved! Go to Solution.
05-04-2007 01:05 AM
1. define content rule without ASR config( redundant-index command).
2. Enable VIP redundancy (Do the redundant-vip config under circuit)
3. configure the global service index for a redundant service (assign redundant index to rule)
05-04-2007 01:05 AM
1. define content rule without ASR config( redundant-index command).
2. Enable VIP redundancy (Do the redundant-vip config under circuit)
3. configure the global service index for a redundant service (assign redundant index to rule)
05-04-2007 01:54 AM
Ok tnx for the help, i just didn't activate the rule then configured redunant-vip, activate rule.
But know i now why it doesn't work. Tnx.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide