This topic is a chance to discuss more about the Catalyst 9000 series family and its consideration in regards of design and troubleshooting. This topic covers best practices for the C9200, C9300, C9400 and C9500 families, platform / software related restrictions and limitations, troubleshooting tips, platform verifications and monitoring / health-check tips for each one of the products in our Catalyst 9000 portfolio. It also covers implementation advice when deploying Catalyst 9000 for SDA/DNA environment.
Ask questions from February Tuesday 26th to Friday 15th of March, 2019
Camilo Hernández has been a Cisco TAC engineer for the Enterprise Routing & Switching team for 2 years at the Mexico City offices. Before Cisco, he worked at Sykes Colombia for 3 years as a Support Engineer – Team Lead, with the LAN Switching team. He specializes in the entire Cisco Catalyst portfolio, and L2 design and troubleshooting on IOS/IOS-XE platforms. Camilo holds a degree on Electronics Engineering at Universidad del Norte, in Barranquilla – Colombia. He holds a CCNA R&S certification. On his free time he loves literature and films, particularly from Colombian artists; he also enjoys photography, playing soccer and hiking.
Alejandro Mendoza is a Customer Support Engineer with the enterprise R&S team. Alejandro holds a bachelor degree in Engineer in Computer Systems form the Universidad de Valle de Mexico, Lomas Verdes. He has a CCNA certification in R&S.
Camilo and Alejandro might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Switching community.
I purchased a refurbished WS-C3750E-48PD 48 port PoE gigabit switch for $170 with a 1 year warranty. It has the latest IOS version of 12.2(55)SE12 running image C3759-UNIVERSALK9-M.When I first got it and fired it up with a console cable attached it start...
I have created several VLANs, specifically VLAN 10 receives the internet from a Telecom router with address 192.168.1.1. The problem is that only the vlan in question browses. The others, despite having activated IPV4 Routing, do not receive a connection....
I have a 3750G that has been reset to factory default and very basic setup done so far Port 24 is set as no switchport and connected to my ISP router. I have so far set this port up as DHCP and gets IP address from the ISP router. From the switch I c...
Hello,I accidentally factory reset my Cisco C9300-24T. Then I tried to fix it with emergency installation.Then I got this problem: Reading bundle usbflash0:cat9k_iosxe.16.09.01.SPA.bin...Validating bundle usbflash0:cat9k_iosxe.16.09.01.SPA.bin...Inst...