Looking at the 10.5 developers guide it appears that JTAPI still does not support server 2012 (Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager Release 10.5(2) - Cisco Unified JTAPI Inst…)
When will support for 2012 be added?
We have the Cisco Call Manager 9.1 (Cloud) & Cisco JTAPI version 9.1 (2.12040) installed in our server.
We are in ordre to migrate our servers 2003 to 2012, and we need solution to the JTAPI compability on WS2012.
Can we take last version of JTAPI with Cisco Call Manager 9.1 ? I'm interested in any proposal
I contacted the engineers on this issue to clarify the response. I should hear back shortly and then I will let you know.
Officially, JTAPI 9.1.2 is not supported on Windows Server 2012, however, JTAPI 9.1.2 should probably function as normal unless the installer blocks the install. That being said the fully supported method would be to also migrate to CUCM 10.0 and above and JTAPI 10.0 and above. JTAPI 9.1.2 will not work with CUCM 10.0 or vice versa.
That being said you referred to Cisco Call Manager 9.1 (cloud)... what do you mean by "cloud?"
One correction to my last post, JTAPI 9.1.2 can be used with CUCM 10.0 but JTAPI 10.0 cannot be used with CUCM 9.1.2. the CUCM version must be the same or higher than the JTAPI version.
My apolgies for the confusion on that one.
Thank you Jock, i mean by cloud that the Cisco is hosted by a service provider.
I will test to install JTAPI on Windows Server 2012, and see if it's ok