Cisco Bug Discussions

We've opened TAC about this issue, Cisco generated us special release to fix that but it still happening.version: 12-1-1-ES-3

Regards this bug, please explain how could i run this SQL query. Thanks,

Could Cisco elaborate more about this critical issue?  When to expect to resolve this bug? ETA

We have this issue and the workaround does not make sense as there is no import\export under phone in BAT - only export.   Please can anyone elaborate on how best to get this issue resolved as I have a lot of updates needed to CSF phones.   Thanks, W...

We are experiencing latency issues on an ASA5515 with the FirePower module and software version 6.3.0.2-67.This issue started at 0300 UTC on the 5th June with both the CPU's jumping up to 90%+ and we experience a latency of between 500-1600ms for tra...

I am having the same issue, in version PI 3.5.1The mail server requires STARTTLS (TLSv1.2) and authentication because of security reasons.But because it is not possible to set this in Prime, I cannot use the email feature. Will Cisco update the email...

Hi,seems that this bug is present also on WAP571E with 1.1.0.3 firmware with a mac deny list (or a permit list). Anyone has tried the mac filtering with radius with success ? 

Has anyone encounter this issue on an ASA running BGP. We are currently running a redundant GRE tunnel over two different carries and using BGP to inject or remove routes from the routing table based on which peer is active. Currently i'm running int...

Firstly, I hope I posted this into the correct discussion. So, I think there may be a bug regarding DDNS update to no-ip.com when using a Cisco ISR1100 model C1111-4P and 8P models using IOS-XE 16.09.x. I have tried it using .01 to .04 (the latest an...

is there any Work around for this Bug? Thanks,vivek 

Is this issue present in NX-OS 9.2.x code?  If yes, when would a fix be available for this train?  Thanks. Addy

Is there any solution for this? I'm using the ios verion 6.2.3 and I'm getting a lot of timeouts in my SNMP queries. It started happening after I added the "ifmib ipsubscriber" command in order to monitor my subscribers.

Hi, Does anybody have any idea why MACSEC is not configurable on N9K C93180YC-FX  40G (QSFP) port (int Eth1/50)?MACSEC interface command is configurable on Eth1/47 (10G)port, but NOT on Eth1/50 (40G) port. Both ports are switchports configured as a t...

Looking at a bug search result, the column labeled "Affected Product Area" has acronyms that don't make any sense to me.  Is there a legend for these acronyms?  For instance, BugID# CSCvh63085 has a "cc-as" for Affected Product Area. Thanks!

We had similar issue this morning (13th september) ST002A-IXCMB uptime is 10 hours, 35 minutesUptime for this control processor is 10 hours, 37 minutesSystem returned to ROM by LocalSoftSystem image file is "flash:packages.conf"Last reload reason: Lo...