I want to shut/no shut 60 seconds after boot the uplink. The uplink has the port description "PNP STARTUP VLAN". There is only one port per switch with this description.
I came up with following applet:
event manager applet SHUT_NO_SHUT_UPLINKevent t...
For a specific usecase, I need to get all wireless profiles from DNAC via API. The documentation (https://developer.cisco.com/docs/dna-center/#!get-wireless-profile) says that the /dna/intent/api/v1/wireless/profile should "Get either one or all the ...
I want to isolate a device in a VN. Which means, I want a policy SRC: SecurityGroup DST: any CONTRACT: deny. But as far as I can stell, there is know "any"-Group? How do you isolate a SG in DNAC?
@john thank you very much for your reply. It's so nice to have somebody feeling the same pain. As a recent graduate of "Cisco firmware updates and iso building" let me tell you - just don't try it and grab a different server. Fun fact, Cisco delivers...
There is a solution. Do not use the official API, use the GUI API (e.g https://dnac/dna/provision/devices/inventory/provisioning) you would use as a normal user.
I wrote an entire migration script depending on the User GUI API for C9800 to DNAC manag...
Hi
Both wired and wireless 802.1X authentications are going as radius requests to ISE, therefore you should find both under Radius > Live Logs. Most probably either the wired client is not doing an 802.1X attempt, or the switch is not configured with...