Does this vulnerability also affects interfaces, which only have LLDP transmit enabled, and LLDP receive disabled, Thanks in advance, Best regards, Naud
Forum Posts
Router Logs: CPU utilization for five seconds: 76%/73%; one minute: 74%; five minutes: 76% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 183 134203088 278803841 481 1.35% 1.36% 1.30% 0 IP Input 416 7607028 595788841 12 0.31% 0.31% 0.31% ...
I'm running ystem version: 8.6.2.22044-1 and my UCS host with my subscriber went down. When I brought it back up and started the subscriber I get the DRF Local service down alert. I followed the instructions in the bug details to start the service ma...
***#sh crypto ikev2 sa IPv4 Crypto IKEv2 SA Tunnel-id Local Remote fvrf/ivrf Status 1 X.X.X.X/500 x.x.x.x/500 none/none IN-NEG Encr: AES-CBC, keysize: 256, Hash: MD596, DH Grp:5, Auth sign: PSK, Auth verify: Unknown - 0 Life/Active Time: 86400/0 sec...
Does this issue exist in ISE 2.2 Patch 5? Also this specifies the appliance, but I assume it occurs in a VM as well.
The service Notification E-mail I received on this stated Prime Infrastructure v3.3. The specific bug referenced (CSCvi18616) states v3.2(3). Why can't Cisco have a consistent means of reporting issues? From my point of view, the bug alerts almost...
Hi Guy's Can someone please explain this to me? "2018 May 18 15:56:14 xx-xxxx-xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed from 10.3.29.100 - login" does my Nexus 5k have this bug? CSCtw88492 version 7.1(4)N1(1) version 7.1(4)N1(1...
Hello, Regarding above Cisco BugID, I am referring to https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180502-prime-upload vulnerability. Could you advise whether non-appliance Cisco Prime Infrastructure are affected?
Once I upgraded my Telepresence devices to CE 9.3.1, most of the contacts disappeared from WebGUI, but the contacts actually still are there when I check physically from the room.
WE have a similar problem on an 897 router , running IOS 15.6(3)M1 May 18 10:48:54.236 AEST: Vi2 IPCP: O CONFREQ [ACKsent] id 2 len 10 May 18 10:48:54.236 AEST: Vi2 IPCP: Address 120.150.217.98 (0x03067896D962) May 18 10:48:54.236 AEST: Vi2 IPCP...
This was actually tested and verified by HTTS (Cisco TAC) on 6.2.3.1 as well as 6.2.3.
Appears to be quite a backward step to me. This doesn't seem ready enough to replace the previous automatic installation option. Apart from the Automatic Provisioning being made a secondary option to downloading the client, and this requiring user ...
I also have this problem. However, the problem is with various laptops (macs and PCs) and is intermittent. WLC version: 8.3.133.0 *Dot1x_NW_MsgTask_1: Mar 26 10:53:13.639: [PA] dc:a9:04:7d:4c:29 Sending EAP Request from AAA to mobile dc:a9:04:7d:4c...
Hello, I am facing similar issue. There is nothing wrong, when I check CIMC GUI, but I see some warnings using IPMI: 40 | PSU1_AC_OK | Power Supply | Warning | N/A | N/A | 'State Asserted' 41 | PSU1_PWRGD | Power Supp...
Does anyone else have this issue in ICM 11.6, CVP 11.6 and Finesse 11.6?
