Cisco Bug Discussions

Im curious how they get a work around for this. The way that the system is designed to work (EAP-MSCAPv2 or the like), the username and password must be in the EAP packet for the flow to continue and since no user is logged in, we cannot process user...

As per our design I am going to install two internet routers with 2 different ISP Link , and will create ZBF on router and for outbound traffic using Zscaler  , LAN side will be router to Core switch , now customer required  Proxy file will be enable...

8821 firmware 11.0.6SR2-4 roaming wasn’t reliable when AP was using channel 165.  Had 4 phones in a room where AP was on channel 165.  2 8821 phones beeped Network Out of Range and stopped working until you left area, two 8821 phones fine and used ch...

This is confusing to me!- How did this bug be not disovered during testing, even a lot of SLR / PLR Licensing changes have occured in ISE 3.0 and 3.1?- How can the Bug be fixed, but no Release or Patch resolving the issue is named?- Why did we upload...

We have AMP 8350 and last version that device support is 6.4.0.14. Is there some workaround to solve this ? Because this device dont support version 7.0.0 +

CSCvz81047 - Cisco NX-OS Software NX-API Command Injection Vulnerability:NXAPI is disabled on our switch and current running System OS version is 7.3(3)N1(1). Will it affect our switch or do I need upgrade 7.3(11)N1(0.852)?

Hello, guys.  I'm having a problem registering an AP 1815i on the controller.  It already had a registry but after a reboot of the controller, when it tries to register, the following errors are listed: [*04/23/2019 08:20:48.4499] CAPWAP State: Disco...

I would like some clarification on this. This affects Cisco Webex Devices, does that mean it affects all physical devices under this page? https://hardware.webex.com/productsIt includes: Desk series, cameras, room series, headphones, board series, ip...

What VDB version does this relate too?If we encounter this issue on 6.2.3 what is the work around?Thanks

I know this is very old and the latest - and sole - contribution to the topic is from June 2017 but the error in the given example does not stem from an ISE malfunction or bug. In my opinion, the enrollment URL points to the wrong path. The switch wi...

i have upgraded my AP1832I-E-K9 AP's to 8.10.151.0 but they still failover to DHCP. Bug discussion, Cisco Bugs

Is there an update from Cisco/Microsoft on this? Can the bug info be updated to show Known Affected Releases 12.x and 14.x since the issue still exists with those CUCM/TSP versions.

Hi we got the issue on our Cisco UCS with Blade M3 and M4 and this has disappeared after:- upgrading from 3.2.2.f to 3.2.3g- do a needed CMIC reset from "recover server -> CMIC reset" BRPietro

this not only version 7.2.3 but we had over 100 end points on 7.5.3 goto BSOD and the only way to recover is uninstall the software one by one and lost 2 business days of work. Some pc were not recoverable. Solution is TBD, at this time. 

CSCvq87553 - Tesla stack reboots with DHCPV6CLIENT-F-HASHINCONS: Hash table inconsistency