ā03-25-2024 12:44 AM
We are affected by this bug although we are running a newer version of ASDM v7.19(1)90 with ASA v9.18(3)56.
"Where used" works for Services but not for Adresses.
Solved! Go to Solution.
ā04-24-2024 01:31 AM - edited ā04-24-2024 01:32 AM
Hi Mitchell, the issue is actually fixed in ASDM version 7.19(1.95), cf. bug CSCwd98702 and release notes.
ā03-25-2024 02:37 AM
- Please report back to TAC ,
M.
ā04-23-2024 01:32 PM
We are running the same ASDM and ASA versions ASDM v7.19(1)90 with ASA v9.18(3)56 and we have the same issue. I have a TAC case opened to see when this will be addressed as I do not see it mentioned anywhere in the release notes of 7.19 or 7.20.
ā04-24-2024 01:31 AM - edited ā04-24-2024 01:32 AM
Hi Mitchell, the issue is actually fixed in ASDM version 7.19(1.95), cf. bug CSCwd98702 and release notes.
ā06-18-2024 06:03 AM
We have version 9.19(1)31 and Where used cannot work too.
The quality of Cisco ASA SW has decreased. We upgraded SW of our ASA 2130 because of vulnerability. Our version met problem with partially lost configuration that caused 3 service outages. So we upgraded to 9.19(1)31 and now the feature Where used cannot work. Also during last upgrade was necessary to set failover IPSec password again as the failover could not establish. Also the licenses were lost (may be the communication was lost before but nobody mentioned it) so no ssh nor https was possible. It was fixed by new registration to On Premise license server.
So three upgrades because of SW bugs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide