05-30-2024 04:56 PM
Hello
Iam facing a issue with HTTPS Management access on a firepower 2110. I assigner chassis mgmt ip address and set ip=block on the interface . I am able to ping the chassis mgmt interface from laptop and other machines. I can access the SSH in mgmt ip but can't access https we checked our firewall log and there is no deny log on 443 allowed.
05-30-2024 11:39 PM
what is the version of code running ?
can you able to post below output :
show version
show network
(is the browser complaining any security error) - you get page not found ?
i generally use pstools (from windows) check the device listening on port 443
psping x.x.x.x:443 (or you can use telnet also see if the port listening)
05-30-2024 11:47 PM
you meaning you want to access FPR via FDM ?
if you are you run local mode ?
did you add ACL of IP accept to access FPR ?
these above two point if missing I think you can not access to FPR by FDM
MHM
05-30-2024 11:50 PM
Hello I am sending a below result
Cisco Adaptive Security Appliance Software Version 9.16(4)14
SSP Operating System Version 2.10(1.241)
Device Manager Version 7.18(1)152
05-30-2024 11:53 PM
check above my comment
MHM
05-31-2024 12:11 AM
Okay i will response you soon
05-31-2024 12:08 AM
I am looking output from FXOS chassis manager output, not ASA. connect to chassis and post.
just to be clear you looking to connect chassis manager not ASA https right ?
05-31-2024 12:14 AM
Hi here is the output, Yes i looking to connect chassis manager.
firepower-2110# show version
Version: 2.10(1.241)
Startup-Vers: 2.10(1.241)
06-04-2024 03:22 PM - edited 06-04-2024 03:22 PM
I have the same problem on FP 9300.
FPR-C9300-AC# sh version
Version: 2.10(1.179)
Startup-Vers: 2.10(1.179)
FPR-C9300-AC#
Follow the same steps mentioned in here https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/fp9300/firepower-9300-gsg/chassis_setup.html#Cisco_Concept.dita_784db60f-f5d6-4c39-bbd7-a01d1ffaf2ba
But no luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide