08-07-2024 02:45 AM
I have 2 Cisco DNAC Appliance that I went to deploy it in Disaster Recovery Mode.
In my use case, I don't have all Prerequisite as below :
I only have 2 sites, the questions where I have to install the witness VM ?
I don't have 1 G between the 2 sites.
L 2 network between sites is supported ?
If I put the 2 appliance in the same site, it will work or no.
Thanks for helping me about my use case .
Best Regards
Younes
Solved! Go to Solution.
08-07-2024 03:51 AM
Hello!
Disaster recovery can be implemented in two ways 1+1+1 or 3+3+1. Witness has to be deployed at a third location. Latency between DR pairs has to be 350ms RTT. Cluster connection between main and recovery site has to be 1Gbps.
So I belive DR deployment wont work for you.
BR
08-07-2024 03:51 AM
Hello!
Disaster recovery can be implemented in two ways 1+1+1 or 3+3+1. Witness has to be deployed at a third location. Latency between DR pairs has to be 350ms RTT. Cluster connection between main and recovery site has to be 1Gbps.
So I belive DR deployment wont work for you.
BR
08-07-2024 04:29 AM
Hello Daniel,
Thank You for your Reply.
Best Regards
Younes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide