Stuggling to run a report on the VLANs being used on a WLC that is in our DMZHave iPSK setup that breaks out on DMZ, when I run a usage report, just shows me the usage on the Management VLAN.I'm after the usage of the Endpoints on the DMZThe DMZ WLCs...
Forum Posts
Hi, We are in the process of replacing our out of support SG550 switches with the recommended CBS350. We have noted that the port designations differ, the SG550 has an up/down numbering scheme, where the CBS350 is horizontal assignment...1.....to 24...
Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Friday, March 15, 2024 through Friday, April 5, 2024. Our colleagues Pandian Ponnuswamy, Gautami Sinai Neureker and Sankkar R will be wa...
We had a IT sec scan and came across a vulnerability with IPMI v2.0 with no fix. I assume this has to do with the CIMC, but is there a way to disabled IPMI? I see ways to possibly disable or limit on other platforms:https://sec.cloudapps.cisco.com/se...
Cisco DNA GUI not workingand Checked by me magctl appstack status : workingmagctl appstack status | grep 0/ (no all working)all Docker Container workingCli wokring maglev catalog package display (All Package deployed)magctl service status (runn...
DNA 2.3.5.5. Software image distribution job created to upgrade some C9300 switches to 17.9.5. This has run and the C9300 switches have been upgraded, however the task in 'Activities/Tasks' shows 'In Progress'. If I click the task it shows it has ...
In Prime Infrastructure, we were using the "Monitor / Monitoring Tools / Clients and Users" Track Clients feature for missing or lost devices.1. Is there a way to export that list of MAC addresses to use in DNAC?2. How do we add MAC addresses that ...
Hi all, I am working on scoping a DNA Center migration project for a customer. Unfortunately, the customer's previous network engineer did not document their maglev configuration very well, so I am needing to login to the DNA Center appliance maglev...
Anyone ever use a synology nas for automation data backups? We are having trouble configuring the synology to work with DNA. We are running DSM 7.0.1-42218 on our synology RS1619xs+Specifically having trouble with the server path configuration portio...
Hi community,I will really appreciate if you can confirm that DNA can integrate 3rd party devices (switches) via API REST to be "manageable" by DNA Center with reasonable limitations. If you can provide documentation it will be wonderful!Thanks all!
I've hit this issue a few times and don't know whether there is an official way to do this. Add IOS-XE images to DNAC and set them as Golden - for example C9300 IOS-XE 17.9.5Upgrade some switches from Inventory, Action, Software Image, Image Update a...
Hi there.I am taking the CCNA2v7 on my own, I do no have an instructor. I have a problem trying to recovery a password. I am practicing in packet tracer: I do not have physical devices. I hope someone could help me out. Here we go with the explanati...
I have a doubt regarding Cisco HA DNAC setup with 3 nodes in cluster. Does the 3 nodes share compute, RAM, storage capacity? Or only one node is working at time? Thank you in advance
I already install DNA Center ver 2.3.3.7, but stub with status unhealthy servcies.how to resolv this?
I have some EOL APs that are being refreshed by CW9166 APs, and I noticed that the CW9166 APs are not showing up in CCC once they are registered to the C9800 WLC. The old AP still shows up under inventory with 0.0.0.0 as the IP Address, I confirmed ...
