DNA Center - Disable Device Monitoring

[dvnetops]

Is it possible to temporarily disable monitoring on a device that may need to go offline due to a planned outage or maintenance? I'm new to this community, so in advance thank you for any replies and input. - JD

[Mike.Cifelli]

AFAIK you should be able to go to Network Telemetry->Site View->Site->Select the NAD you wish to disable monitoring on->Actions->Disable Telemetry. Then once done re-enable as you wish. HTH!

[dvnetops]

Thanks for the suggestion. I did disable telemetry on the device that was taken offline for testing purposes. I was hoping it would suppress the device unreachable and wsa export failure email notifications but it didn't work.

[franklinb]

Hi Mike, I don't see those options available in the current DNAC GUI (2.2.3.0 here)

If you meant Design/Network Settings/Telemetry then there are no NADs visible in this view for me, only sites and the common collection settings. 

[matt_turso]

Hello dvnetops,

Did you find a solution to this...same boat.

Thanks,

MT

[Preston Chilcote]

Cisco DNA assumes that network devices it manages are supposed to be always on and reachable.  The only options you have today, that I can think of are (not ideal):

- Remove device from inventory

- Use the "Ignore" option on the Issues that arise when you shut down a network device

If you have a good use case for putting a device in some sort of "suspension" mode, please feel free to submit a Make a Wish from the Help menu (the question mark icon in the GUI).

[Steve Allen]

"if you have a good use case"... 

This is such a basic missed feature for the real world.

[Preston Chilcote]

This feature (called Maintenance Mode) will be coming in an upcoming release.  Not sure yet if it's the next one, coming very soon, or the following.

[Scott Fella]

I can't wait for this feature.  Glad I found this thread, it was driving me crazy:)

[Arash Emami]

I had the same problem and just moved the device in maintenance mode. So you can schedule a time for maintenance and no alarms will be shown anymore.

[shane.carnahan]

You are able to schedule maintenance.