05-04-2023 01:50 AM
Hi
So you can only have one network profile per building but how do I then only apply templates to a subgroup of devices?
Say I have 50 9300 switches all physically the same model and IOS-XE version and I have templates A,B,C,D.
Some of the switches need template A + B some A + C and some C + D.
Is there a method to do this as on the surface it look like all templates assigned to a network profile will get applied to all devices of the same model.
Thanks
Solved! Go to Solution.
05-04-2023 09:07 AM
You can tag the devices in Inventory and then specify those same tags in the Properties of the template. Then when it comes time to Provision, only the tagged templates will get applied to tagged devices.
05-04-2023 09:07 AM
You can tag the devices in Inventory and then specify those same tags in the Properties of the template. Then when it comes time to Provision, only the tagged templates will get applied to tagged devices.
05-04-2023 09:46 AM
Thanks Preston
I had a feeling tags might do something. The documentation is rubbish here. Tags are mainly referred to as a method of sorting things rather than as a way of linking thing. I'll give this a go with my test switch.
05-10-2023 07:20 AM
Worked really well. Thanks Preston.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide