hi all,i tried to open some ports in my switch 9300 to edit in Cisco DNAc, but i can`t open port to assignment?tried to change browser with no change.do any one have suggest?
Forum Posts
I have deployed about 40 switches with DNA center using PnP. Now we want to change the username and password for the CLI. I have tried changing it network settings for a building but it then fails to deploy. Is there a different methodology required ...
We plan to migrate our network to SD Access, but we found the DNA-C assign the first available IP address on a given IP address pool to the anycast gateway (for example, 192.168.10.1 for network 192.168.10.0/24). However, on our network, we use the l...
Hi I have a new SDA brownfield deployment, which needs to retain the old ip pools. I was looking at FZs to accommodate this requirement.(vlan/ip pools per floor) however with this the ise policy lines are growing exponentially.The authz policies look...
Hello, I was wondering if there were minimum pool requirements for both the LAN Automation and IP Handoff pools. LAN AutomationFor LAN Automation, I believe the formula for calculating the number of IPs (when using 2 interfaces per device) required i...
DNAC Version 2.2.3.4We have seen this in multiple locations on different switch stacks, random periods of time. We deploy switch configurations using templates in DNAC, one of the settings is to configure two uplink ports as L3 routed with IP info,...
hi all,can i create a local CLI account as same as maglev privilege ? with any name like test but must have same privilege as full admin?thanks in advance
Resolved! Cisco DNAC Integration with Aruba
Does Cisco DNAC provide integration with Aruba's Wireless Access Points, Switches, and ClearPass? Any suggestions and tips would be highly appreciated.
Resolved! DNA Center in Virtual Edition
Hi,I'm wondering about Cisco intentions for the DNA Center appliance and specifically the formats that are available today as a supported platform? We have the physical server appliance now, we all know that. But is there a virtual on premise or clou...
Hi,Has anyone worked out how to connect to the CBAR service? DNA states you need to enter a client-id and key that you get from the Cisco API console page. Having logged into that website I have no clue what I'm supposed to be doing. It asks for y...
Hello,Assurance -->Dashboards -->Health We don't see any data in Application tap. Is it related to any license issue or something. Could someone help on this. DNAC version : Version 2.3.3.7-72328
Resolved! DNAC CLI Template
Hi,I have a customer who has a large estate spread across multiple regions. We've set-up the Network Hierarchy to reflect the geographic locations and buildings.Most of the switches across the whole network have config that is around 95% the same for...
i have a client who already has the cisco DNAC license and want to implement cisco DNAC on the VM
Cisco Prime will reach EOS September 29, 2023. The replacement with DNAC. This is a network post and not Collaboration topic. So moving to Network Community. 2.12.0.0 2.12.0.0
Hi Guys,Well I would like to activate 802.11r for my corporate Wifi since our wlan card are compatible with fast-roaming.Configuring this settigs, directly from my WLC9800 is pretty easy, you edit the WLAN, Enable Fast Transition and mark FT+802.1xHo...
