DNAC Server Connectivity

[fatalXerror]

Hi Guys, I am new in deploying DNAC server, I would like to check for the Enteprise Ports,

1. Is it mandatory to have it in NIC bonding?

2. If I wanted it to be in NIC bonding and my switch is not yet in VSS or stackwise, can I just connect first 1 cable of the bonded NIC of dnac then I will just connect the other part of the NIC to the switch if it is ready?

Thank you.

[balaji.bandi]

Depends on the deployment  single, 3 node or DR setup.

1. Is it mandatory to have it in NIC bonding?   - good to have so high availability (by saying that DNAC is just orchestration tool, so its not critical device).

2 - yes you can configure and you can connect later when the other ports available 

check DNAC Planning :

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/catalyst-center/2-3-7/install_guide/b_cisco_catalyst_center_install_guide_237_2ndGen/m_plan_deployment_2_3_7_2ndgen.html