cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
664
Views
0
Helpful
2
Replies

Due to DHCP Timeout Event

ahmed136846
Level 1
Level 1

Hello Community,

We see an alarm in DNA-C in which it says "Due to DHCP Timeout " , users are not able to connect to the Guest network or associate with the WLC.

please check the attached snapshots and advise if this error was seen before, what can we look for and how can we investigate such issue.

Awaiting your response.

 

Thanks & best regards.

 

2 Replies 2

marce1000
VIP
VIP

 

 - Check the DHCP server's logs and look for activity from wireless users , what is the controller model ? (Check the DHCP setup and configuration)

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

JPavonM
VIP
VIP

I see the endpoint is roaming between APs, so check if both of them are properly configured, not only having the same Flex profile in C9800, but also in the switch port. If that WLAN is using Central DHCP, then all traffic is going through CAPWAP tunnel and WLC should be talking to DHCP server to validate previous IP in the other AP.

Review Cisco Networking for a $25 gift card