Maglev CLI - scattered prompt

[pielunswe]

Hi!

Need some advice regarding scattered promt when login to maglev @ 2222 from computers. Can not type anything and no other command (eg. ctrl + keys) works. Maybe some one knows any command to test?   (have tried with putty, securcrt, terminal and some other app) I do have access to CIMC and the KVM where it seems to be normal promt for maglev if I can restart any service.

Thanks in advance.

[pieterh]

if this was serial connection I'd expect data/bit/parity do not match , but this is telnet/SSH
either your terminal setting is not set to ANSI or VT-100,
or the maglev does not detect the setting of your terminal program properly

[Tomas de Leon]

I have not seen this issue, but here are two examples when using iTerm2 & secureCRT applications on a MAC device.

[pieterh]

in terraterm try different settings in this item->  I think  setting CR+LF when receiving (unix-style) new-line wil improve your output

[pielunswe]

Hi,
Thanks for reply. Tried the examples you gave guys but no luck. It's from multiple computers as well, with same settings that worked before. So I suspect DNA side, but unsure what to do. Restart any service related to "maglev"...if there is any....    

[Tomas de Leon]

What is your current Catalyst Center Release version?

[pielunswe]

2.3.5.5.  DN2 XL