Hi Guys,So currently a customer is migrating to DNA center with completely new switches.but for the last 32 switches and with these we had the following process:select your seed device > select the port of the switch > IP pool, hostname etc.and then ...
Could someone link me to documentation that shows how to set up DNA as a syslog server? We're moving away from Prime and Solarwinds and I'd like to use DNA Center for syslogs. The only documentation I can find is how to point DNA to an external syslo...
Good day, Has anyone else seen this behavior? We have a customer using DNAC to configure their SSIDs on WLCs with AireOS 8.10.x. On one of the SSIDs the WPA2 PSK should be changed regularly. However, changing this setting in DNAC for the SSID under t...
Hello, By default DNAC polls a network device via SNMP every 10 minutes on many OIDs. For low-end or legacy switches running old IOS version (C3650 - IOS-XE 3.6.8E for example), I see SNMP CPUHOG on a few specific OIDs. These CPU spikes lead to some ...
Hello everyone,When I import a new image into DNA Center then assign it to a device family that's not already created, nothing happens.I was expecting to see a new family created, so I can use the image during pnp.Does anyone know how to solve this p...
It is possible to change the automatic compliance scan from Saturday at midnight to some other time? I have a programmed maintenance window in my FW that is at a different time during the week. I have not been able to get my EoX scans to complete e...
HiWe've got a deployment running version 2.3.3.7 on a single node, I recently enabled event notifications for a variety of things, AP disconnections, OSPF flaps etc. However I only seem to receive these alerts when the issue is marked as resolved, ra...
Dear Community, I am about to deploy SD-WAN controllers on Cisco Cloud. However, up to this point, we are unable to sign in into SSP. Logging in Cisco Software Central, it was possible to see that there is an active Smart Account, as well as Virtual ...
hi all,i need to get my all ports status like up or down and working now or not , which Vlan ,current traffic, i mean all available data.i need to do it from DNA, my version 2.2.3.4
hi all,i have 20 switches and 5 routers in my environmenthow to set banner or message of the day via DNA instead of set banner one by one in switch or router
hi all,i need to ask what is new features in cisco DNAc 2.3.3.7 but on prime solution not in cloud like AI analytics.any advise?
Hi all, Is there a way to clear the Inventory Insights in DNAC? Can this be done through either the (CLI) or (GUI)? I've received incorrect alerts on version 2.3.3.6-70045 and I'm looking a method to remove them.
We will be replacing C9300-24P-A with the C9300-48UXM-A devices as our Border/Control node devices in our Fabric sites. Being that there will be some configuration differences, is the only way to transition to the newer switches to start from scratch...
Hey all, I just want to know what the difference between the DNAC subscription (L-DNAC-MGMT-ADD) and the DNA Virtual Appliance (DN-SW-APL) is? What are the use cases for each? Please, provide me with resources! Thanks
Hey all, I just want to order Cisco DNA Center Virtual Appliance. Simply via CCW I ordered DN-SW-APL and I found that there are two options: DNA-SW-AMI and DNA-SW-OVA I need to know how to differentiate between the two and which one is the most suita...
