PnP with MS DHCP server

[NKT]

My PnP agent is not getting DHCP IP address from MS DHCP server , where as it is working from Cisco swtich DHCP server.

is there any restrictions on MS DHCP server ?

9300 SW---new 9200 sw-as PnP agent

any suggestions

[PabMar]

Hi NKT,

What Windows server version is that?

You have to also make sure the Option 43 is correctly setup in Win Server - This is not a fix of not receiving an IP.

Try with this in the ASCII field: 5A1N;B2;K4;Ix.x.x.x;J80 -> Where x.x.x.x is the IP address of the PnP server.

Let me know if that works.

Regards,

Pablo.

[NKT]

There is mis configuration in 9300 switch , after changed to Access port from trunk port , dhcp is working and PnP agent got the IP from MS DHCP server.

thanks for your replies

[NKT]

thanks for your reply, ASIC value is correctly configured.

[Dan Rowe]

There is no limitation with MS DHCP server. If you are not receiving an IP address from the DHCP server, it could a misconfiguration of the scope on the DHCP server. I would suggest taking a packet capture to ensure a DHCP Offer is being sent by the DHCP server back to the PNP agent.

[NKT]

thanks for your reply,