I'm using scom 2012 with the UCS Mp 2.6.2 to monitor 4 chassis with B series blades.
I have two UCS domain (2 chassis on each) on two sites.
In my configuration, all services profiles for the two domains are created on one UCS domain and export/import on the other domain (for the Disaster Recovery Plan).
The two UCS domains are created in scom in the same override mp: MP_OVR_UCS
All is working great. It's a very nice tools!
On each UCS domain i have also some service profiles unassigned/unassociated (they're waiting for the disaster:).
I don't want to monitor (discover if possible) this service profiles.
I create two groupes in the same mp MP_OVR_UCS: SITE1_SERVICE_PROFILE_OFF & SITE2_SERVICE_PROFILE_OFF
On each Domain, override on Service Profile Discovery to disable for the corresponding group.
But the unassigned SP steel in error.
Is it possible to do not discover this SP?
I do not want the link Operting systems / UCS -> an error for a system is reach back by the system itself and by the CISCO.
For my UCS, i would like only HW inventory and service profiles.
Can i disable the operating systems under cisco instance.
Thank you very much for your help and support.
Solved! Go to Solution.
Let me take the second question first...
For disabling the Operating System under Cisco Instance, you need to disable the Computer Discovery
Follow the steps outlined below to disable the Computer Discovery:
Impact of disabling Computer Discovery:
Disabling Computer Discovery in Cisco UCSM SCOM MP will not have any impact on the monitoring of hardware and logical components of UCS Domain, even all Windows Computer will continue to be monitored by SCOM, only mapping between the Windows Computer and the UCS Domain will not be available.
For the first questions
Could you please let us know the following:
1) Did you explicitly add the Service Profile objects to the group or written rules for selection?
2) Once the group of service profile objects is disabled, did you remove the disabled object from SCOM?
3) Are the Service Profile objects removed from SCOM and still do you see the errors related to them in SCOM Console?
And thanks you for the fast response!
All sounds great for this, but can i ask you two sub question:
I will retry to disable the service profile discovery for the group and waiting a night.
Thank you again for your help Amit.