Reset Cisco 9300

[ahmedmaged9432]

need to reset switch Cisco 9300 to factory settings but i press the mode bottom when plug it in power and waited till i enter the enable mode in the switch and  nothing is happen , is there is steps to do reset 

[ChuckMcF]

REF: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-11/configuration_guide/sys_mgmt/b_1611_sys_mgmt_9300_cg/simplified_factory_reset.html

Please read the document above thoroughly before issuing this command to ensure you understand the impact prior to executing.

enable

factory-reset config

HTH,

Chuck McFadden

--Please mark helpful posts as helpful--