02-28-2019 12:13 PM
HI folks,
I have 8 stand alone Cisco 3750G-PS-S Switches. I have upgraded 7 out of 8 Switches with IP Sevices successfully but one gives me hard time. its timing out.
1- there is communication between the switch and the TFTP server (laptop connected to switchport - same subnet through a vlan).
2- ping between both devices successful.
3- forced del current ip base like I did on others to have enough space.
4- tested writing to flash - passed.
5-formatted Flash and wrote to it running config and vlan .dat
6-added exec-timeout 0 0 to con 0
Still have the same error.
is there something that I am missing.
I am using .bin IOS file as I did on other 7 switches.
Please advise,
Best Regards,
Masood
02-28-2019 12:51 PM
Hi there,
Have you tired increasing the block size? :
! ip tftp blocksize 1024 !
cheers,
Seb.
02-28-2019 12:52 PM
02-28-2019 01:00 PM
this command doesnt exist.
interface-source exist and has been defined.
here is what I get:
2d00h: %SYS-5-CONFIG_Iopy tftp: flash:
Address or name of remote host [10.124.1.99]?
Source filename [c3750-ipservicesk9-mz.122-55.SE12.bin]?
Destination filename [c3750-ipservicesk9-mz.122-55.SE12.bin]?
Accessing tftp://10.124.1.99/c3750-ipservicesk9-mz.122-55.SE12.bin...
Loading c3750-ipservicesk9-mz.122-55.SE12.bin ... [timed out]
%Error reading tftp://10.124.1.99/c3750-ipservicesk9-mz.122-55.SE12.bin (Timed out)
Switch#
in other 7 switches, I did not get the line that says
Loading tftps://x.x.x.x
only on this switch.
Best Regards,
Masood
02-28-2019 01:45 PM
02-28-2019 01:52 PM
02-28-2019 02:38 PM
02-28-2019 10:10 PM
03-01-2019 01:13 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide