cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1429
Views
10
Helpful
7
Replies

WS-C2960-8TC-L

Noname9
Level 1
Level 1

Hi team

Do WS-C2960-8TC-L vs Catalyst 2960C-8TC-L have the same IOS version?

I couldn't find IOS version for my WS-C2960-8TC-L. But I found version this

Catalyst 2960C-8TC-L Switch

https://software.cisco.com/download/home/283915790/type/280805680/release/15.2.7E6

 Is this version compatible with WS-C2960-8TC-L? 

Thanks 

7 Replies 7

Leo Laohoo
Hall of Fame
Hall of Fame

No, they don't.

Noname9
Level 1
Level 1

Thank you, Leo Laohoo.

Where I can find latest stable version for that switch? 

The last IOS version that can support classic C2960-8 are: 

  1. 12.2(55)SE12
  2. 15.0(2)SE11

Leo Laohoo, I have 2 units, both WS-C2960-8TC-S.

One unit is as follows (VEASP1):

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 9 WS-C2960-8TC-S 15.0(2)SE4 C2960-LANLITEK9-M
System image file is "flash:c2960-lanlitek9-mz.150-2.SE4.bin"

Can I load the c2960-lanlitek9-tar.150-2.SE11.tar file or do I have to use the other c2960-lanlitek9-mz.150-2.SE11.bin that doesn't have the web interface?

Second unit is as follows (WSUSP1):

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 9 WS-C2960-8TC-S 12.2(46)SE C2960-LANLITEK9-M
System image file is "flash:/c2960-lanlitek9-mz.122-46.SE/c2960-lanlitek9-mz.122-46.SE.bin"

Can I upgrade this unit to 15.0(2)SE11 or do I have to use 12.2(55)SE12? Same question about the tar versus separate bin file.

I have both the tar and bin files for both of the versions you mentioned.

Thank you for your help.

Rick Carlisle

Those switches are running on LAN Lite.  The links that I have provided are incompatible.  
Try these instead: 

LAN LITE 15.0(2)SE11

Download the TAR file and use the command "archive download-sw tftp://<IP ADDRESS>/c2960-lanlitek9-tar.150-2.SE11.tar" to push the firmware up to the switch.

Thank you Sir! Both switches loaded with the tar file with no problems and are up and running on the new IOS. 

Rick Carlisle

this model is EOL. https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-series-switches/eol__C51-726504.html

you cannot download it form official sources now. 

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB