Resolved! Meraki and OP5 / No-match?
Hi Everyone !!It seems that no package is available for OP5 to have a look at all our Meraki equipment ??Can that be true ?
Forum Posts
Hello,I am searching for the way to configure the recipient of the e-mail notification for network maintenance, for example firmware updates.Documentation for this seems to be not very complete.When I look at Network-wide -> Configure -> Alerts, I ca...
Greetings,I just finally got to the point where I've deployed a few combined networks and I've been comfortable with their configuration, so I decided to create a template (versus just copying from another network). Seemed pretty straight-forward unt...
HiWe are setting up a lab for demo purposes for potential customers. We have got the following equipment:2 MXs2 Switches2 APs1 CameraWhat would you suggest to be the best setup of these devices to cover various scenarios ? Something that would allow ...
Resolved! Clone a Disable Organization
Hi, I have a organization that was created as a PoC and it have no more valid license. I am thinking if is it possible to clone this organization with all configurations and networks.Thanks
in the old version of the Dashboard I could see the signal strength and also see the passerby's and other APs etc.. via a time period. Now it does not show either. are there new settings I need to put in place for that or is it deprecated?
Resolved! Big personal favour
Friends,I am after a favour is there anyone who can loan a VPN access into the US, I want to watch the Discovery Shark Weekend and its not available in the UK and if I use one of the standard "Hide my IP services" they normally get blocked - my email...
Hello Community,I have a question about the two license models. Since November 2019 there has been an additional Model license, the Model Per-Device license. Is there anything known that maybe the default model co-termination should be replaced by th...
Resolved! Viable design with two MX appliances.
Is the following design viable? (Sorry if the diagram looks a little dumb, I'm not really a network guy..)
Instead of forgetting/blocking a client with faulty mac-address, Is there a way to delete the client completely?
Hi peeps,Please I would like to know if MX security Appliances have all the features FortiGate 200E has including the captive portal enabling feature or any other Wireless web Auth? If yes or not what are some important features either one of them ha...
I've got a user who is clearly torrenting and I want to block them. I changed their device policy from Normal to Blocked, but did not add a message, and it seemed they were blocked. But I check again today and they have managed to use a lot of data i...
Resolved! Meraki Support Down.
Hello, This is Erasmo and I'm from the CX CISCO Duty Management Team.We got a report that customer is having an issue opening a new cases with you guys, it seems they have been trying to call the Meraki frontline and they get no answer also they are ...
Resolved! Reorganizing our Dashboard
Much of our organization is shut down at the moment, so I figured this would be a good time to do some cleanup. When we moved to Meraki, our dashboard was set up to have separate networks for each firewall (22), then all of the switches from all site...
Resolved! Goodbye Caroline
@CarolineS1 is the community manager and has looked after the community from its inception charged with growing it to what it has become today.Caroline is leaving us today for the noble role of full time mother to her children. No one will deny her t...
