04-12-2023 11:00 AM
For some reason, starting with ISE 3.2, on the CLI, the command copy running-config startup-config no longer works. Has anyone else ran into this, and do you know if the syntax changed?
Solved! Go to Solution.
07-28-2023 08:26 AM - edited 07-28-2023 08:27 AM
Configuration changes are saved by default since ISE 3.2.
Have look here: https://www.cisco.com/c/en/us/td/docs/security/ise/3-2/cli_guide/b_ise_CLI_Reference_Guide_32/b_ise_CLIReferenceGuide_32_chapter_011.html
05-22-2023 02:03 AM
There is no CLI command supported for copying the Running Config to Startup Config in ISE 3.1. You can refer to the below link for CLI command reference guide for ISE 3.2 version.
07-28-2023 08:26 AM - edited 07-28-2023 08:27 AM
Configuration changes are saved by default since ISE 3.2.
Have look here: https://www.cisco.com/c/en/us/td/docs/security/ise/3-2/cli_guide/b_ise_CLI_Reference_Guide_32/b_ise_CLIReferenceGuide_32_chapter_011.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide