Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have already implemented TACACS+ in order to log into the CLI of our WLC using our domain admin creds. We are looking to do the same thing for web ui of the wlc. We already tried going under AAA Advanced and setting authentication and authorizatio...
We use Cisco Identity Services Engine for MAC Filtering on our switches, and one issue that has come up are devices that use the Plugable Docking Stations. With these docking stations, they do not forward the MAC address of the machine's Ethernet Int...
I found an End of Life announcement for the Cisco Catalyst 9105 Teleworker, but that EOL announcement stated that it does not include the C9105AXi access point. Does anyone have any idea of the end of life for the C9105AXi access point specifically?
I am looking to upgrade our wireless controller from version 17.9.6 to 17.9.7. I selected the option to do the AP Image Predownload, and the predownload failed on 13/45 of our APs. Does this mean that if I were to download and install or save and act...
We are looking to implement a zero trust through ThreatLocker and therefore we would like to find out which ports on the WLC need to be able to communicate with our domain controllers, our radius server, and with the APs. I have already looked at the...
I figured it out, and it was due to me failing to read the first few lines of the document concerning read-only access.The existing SSH Admin Access policy we had in place for the CLI had priv 1 as default and priv 15 as the maximum in order to force...
I have been going through this guide and I seem to have things configured the way it suggests, but when I sign into https, it still only gives me WLC Monitor view. For the authorization, it is hitting the Device Admin Policy that allows Privilege 15 ...
Thanks for all the replies. It does appear that most of our laptops do support turning on MAC Passthrough, and the HPs actually have this turned on by default, but the Plugable Dockign stations do not support it, so this may require further internal ...
I am aware that ports 49152-65535 are typically used to receive DNS replies on an endpoint, but I was seeing DNS traffic from the server hit the WLC on port numbers in the 8000s range, so that is why I originally posted this.
