08-15-2012 02:30 AM - edited 03-17-2019 02:33 PM
i have configured anyconnect vpn on cme and connected the iphone to vpn using anyconnected secure mobillity client.its working good.but i couldnt access the internet.why is that?
08-23-2012 10:06 AM
my first guess woulkd be that the ssl anyconnect is not set for split tunneling and the cmeis not allowing the traffic from the iPanto haqirpin within the CME/router box
Sent from Cisco Technical Support iPad App
08-23-2012 10:21 AM
Look at Split-Tunneling as advised by Richard (it has to be disabled) and your NAT-settings.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
08-23-2012 11:13 PM
After reading your post again: I understood your post that way that you want to reach the internet through your router. Then you need split-tunneling disabled und NAT for the external clients. But if the clients should reach the internet directly, then split-tunneling has to be enabled.
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide