I am testing Cisco Jabber for Windows 9.0.4 on XenApp 6.5 environment, and I am facing issue that audio from Jabber to Physical phones is missing. But audio from Physical phone to Jabber is working.
On windows both microphone/speaker are working properly, but Jabber option Audio shows "Speaker is not found" and "Microphone is not found". Also I cannot change anything under Audio window.
I believe Jabber for Windows 9.0.x is supported on XenApp 6.5 environment.
Is there any way Jabber to recognize or change the configuration of Microphone and Speaker?
Also is anyone testing Jabber for Windows on XenApp environment?
If everybody on this thread is referring to using Jabber on virtualized environment on SOFTPHONE mode, that's not supported.
if this helps, please rate
I have the same problem, tried up to Jabber 9.2.1 and still the same issut, one-way-audio on Xenapp 6.5 published desktops. The forwarded mic in Xenapp sends no audio to the remoteside.
In the audio recording and playback setting on xenapp desktop, I can see that both directions do react and another audio recorder is working.
When I login to the same Xenapp Server via MS RDP, the Jabber is working great.