Cisco VG400 Support for Point-to-point Hotline

[Learnercisco]

Hi Tech guys,

Could u suggest if Poin to point solution if possible in VG400

Call flow will be

Analogue phone A--------------------VG400-FXO-----------PSTN--------------------Analogue phoneB. 

Analogue phone c--------------------VG400(FXS)--------------------Analogue phoneD. 

please find the attached block diagram for more information. 

Please let me know if this is possible. Than

[Vaijanath Sonvane]

Hi,

You can use Cisco VG400 to provide hotline feature for analog devices but not as a standalone device. You need to use it with either Cisco Unified Communication Manager (CUCM) or Cisco Unified Communication Manager Express (CUCME) or third party SIP/H323 Call Control System.