CLI commands needed for CMS and Expressway

[Ahmed Tarek]

hi all,

is there any PDF covers CLI commands for

CMS 3.5

expressway 14.3 ?

[b.winter]

Yes, and they are publicly available to everyone, if you google it.
"Cisco meeting server mmp command line reference" and "Expressway Administration guide"

[Ahmed Tarek]

i already did with not satisfied results match with my needs

[b.winter · Accepted solution]

https://www.cisco.com/c/en/us/support/conferencing/meeting-server/products-programming-reference-guides-list.html
https://www.cisco.com/c/en/us/support/unified-communications/expressway-series/products-maintenance-guides-list.html

[Nithin Eluvathingal · Accepted solution]

Use these links:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Reference_Guides/Version-3-5/Cisco-Meeting-Server-MMP-Command-Reference-3-5.pdf

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/admin_guide/X14-3/exwy_b_cisco-expressway-administrator-guide-x143/exwy_m_expressway-interfaces-x143.html

[Ahmed Tarek]

thanks @b.winter, @Nithin Eluvathingal for your help

i was searching for something more spicific like below link

https://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_s08_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1370216

anyway thanks for your usual support