I install CUCM 11.5, CUPS 11.5 and CUAC. I get an error on the CUAC and CUPS connection. CUCM connectivity is OK but CUPS connectivity is failed.
Do you have any idea this problem?
Sorry thought I posted this earlier
Configuring Access to Cisco Unified Presence Server
Cisco Unified Attendant Console Advanced is capable of integrating with Cisco Unified Presence server
to display real-time presence status within the Cisco Unified Attendant Console Advanced directory.
To configure this integration, you must add the address of the Cisco Unified Attendant Console
Advanced server to the firewall information on the Cisco Unified Presence server. To add the address,
do the following:
Step 1 Use your internet browser to access Cisco Unified Presence Administration, and then choose System >
Security > Incoming ACL.
The Find and List Allowed Incoming Hosts page is displayed.
Step 2 Click Add New.
Step 3 Under Incoming ACL Information, type a Description of the address, and an IP Address Pattern.
Step 4 Click Save.
Have you done this?
Do the same capture from your CUAC server is it possible the traffic is not leaving the local server?
Look for the traffic on 5060 leaving your CUAC server on the server and then span the port that connects to the server.... do you see the traffic your looking for leave or egress the CUAC server?