cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
221
Views
5
Helpful
2
Replies
Highlighted
Beginner

How to setup CUCM 10.5 Lab setup on vmware with esxi

Can anyone suggest a good resource to create lab setup for CUCM 10.5 in VMware with ESXi

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Cisco Employee

There is nothing special about installing a lab CUCM, same instructions, requirements and files as if you were installing it for production.

If you want lab licensing, you would need to buy a lab kit or NFR kit.

 

You should be targeting the latest shipping release, not 10.5 which is EOS and not receiving any updates

https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-741767.html

HTH

java

if this helps, please rate

View solution in original post

2 REPLIES 2
Highlighted
Hall of Fame Cisco Employee

There is nothing special about installing a lab CUCM, same instructions, requirements and files as if you were installing it for production.

If you want lab licensing, you would need to buy a lab kit or NFR kit.

 

You should be targeting the latest shipping release, not 10.5 which is EOS and not receiving any updates

https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-741767.html

HTH

java

if this helps, please rate

View solution in original post

Highlighted
Beginner
Beginner

Hi

If you have the Cisco CUCM software with you, we can provide you services for installing and configuring your CUCM.

All services will be remote ( via webex ).

For more details you can write to info@parsec-tech.com

www.parsec-tech.com