IMP subscriber dbreplication runstate

[jaheshkhan]

Today when i entered utilis dbreplication runtimestate in imp subscriber i got the following output

DB Version: ccm12_0_1_10000_12

Repltimeout: Only available on the PUB

PROCESS option: Only available on the PUB

Cluster Detailed View from TFM-IMP-SUB (2 Servers):

                                      PING      DB/RPC/   REPL.    Replication    REPLICATION SETUP

SERVER-NAME         IP ADDRESS        (msec)    DbMon?    QUEUE    Group ID       (RTMT) & DB Status

-----------         ----------        ------    -------   -----    -----------    ------------------

ABC-IMP-PUB         172.20.53.8       0.245     Y/Y/Y     18344    (g_4)          (2) DB Active-Failed

ABC-IMP-SUB         172.20.53.9       0.013     Y/Y/Y     0        (g_6)          (2) Setup Completed

Here DB status says DB Active-Failed what could be the reason? why its so? whats the next step i want to do to rectify it? reset or repair? there is no error or mismatch.. then what does it mean then

count number shows entirely different .

run sql SELECT count(*) from enduser

publisher it says 12 and subscriber it says 13..

[Mike_Brezicky]

What does the same output look like from the Publisher?
Please make sure you look over the Troubleshooting guide for DB Replication. - https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200396-Steps-to-Troubleshoot-Database-Replicati.html

You can run a stop on the subscriber and then a reset node from the pub, but I highly suggest opening a TAC case if you are not 100% comfortable with the database commands.

[jaheshkhan]

I saw that link. but cannot see the same situation that im facing. 

One more thing, HA is not enabled in the presence group yet.

[jaheshkhan]

I saw that link. but cannot see any thing in that  same situation that im facing right now. 

One more thing, HA is not enabled in the presence group yet.