09-12-2018 12:11 AM - edited 03-17-2019 07:43 PM
Dears
We have an issue with new deployment of MRA solution.
Expressway core and expressway edge (dual lan) v 8.11.1
When we try to login from outside it give us error message of wrong password and user name.
Also we test using CISCO TAC tool, we found no issue but failed to get edge-configuration .
When we checked Exp edge event logs we found that
2018-09-12T09:53:20.524+03:00 | traffic_server[26571]: Event="Sending HTTP error response" Status="401" Reason="Unauthorized" Dst-ip="10.100.60.1" Dst-port="35716" UTCTime="2018-09-12 06:53:20,524" |
2018-09-12T09:53:19.627+03:00 | traffic_server[26571]: Event="Sending HTTP error response" Status="401" Reason="Unauthorized" Dst-ip="10.100.60.1" Dst-port="35714" UTCTime="2018-09-12 06:53:19,627" |
As appeared dest ip is gateway of lan2 (firewall dmz interface ).
I think this IP must be the real ip device which I use for trying to connect through jabber.
Please Advice
09-12-2018 07:16 AM
09-12-2018 11:23 AM
Dear
RMA is new deployment but jabber not new , we can login from internal network .
it's dual domain .
yes i tried to refresh exp-c but same issue .
Please check the attached logs of expressway Core and edge during issue .
Please note my real ip (IP of Andriod Phone which i used for test ) not appeared in logs ,but this ip (10.100.60.1 )appeared instead of it (this ip is belong DMZ interface of firewall which is gateway of exp-E)
https://drive.google.com/drive/folders/1VINSCwyZ62-GIhunhksV26NjIgmGoIl3?usp=sharing
Thanks
09-13-2018 04:16 AM
09-14-2018 04:40 PM
Dear,
The issue has been solved , it was NAT issue on FW .
Ahmed , Expressway C has only one lan port not two.
Thanks
09-17-2018 12:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide