on 10-13-2015 10:00 AM
Problem
The Publisher has been upgraded to 10.6.1 SU1 using Refresh Upgrade. However, during the fresh installation of UCCX subscriber on 10.6.1 SU1 with the purpose of Adding to Cluster post installation to achieve HA, the installation keeps failing at below screen:
Resolution
Contact TAC and get the workaround done in the root post which you can attempt to perform the installation again and it will go through.
Reference Bug - CSCuw65303
Regards
Deepak
Thanks for posting this Deepak- I encountered the exact same problem just now
Glad that it was of help to you. Please remember to mark useful posts and discussions
Regards
Deepak
I performed an upgrade of 10.6.1(SU1) to 11.0.1 this weekend. The upgrade of the Publisher went perfectly fine.
However, the upgrade of the Subscriber failed. I pulled the install log files of the upgrade and found this in the logs:
03/12/2016 10:30:01 component_install|(CAPTURE) error: %post(UCCX08_Post_install-8.0.1-1.i386) scriptlet failed, exit status 1|<LVL::Debug>
03/12/2016 10:30:01 component_install|File:/opt/cisco/install/bin/component_install:902, Function: execute_rpm_cmd(), rpm -iv --replacefiles --nodeps /common/rpm-archive/11.0.1.10000-75/RPMS/contactcenterexpress/UCCX08_Post_install-8.0.1-1.i386.rpm failed (1)|<LVL::Error>
The tried the upgrade again using SFTP instead of ISO mounted from the datastore and got the same error.
I proceeded to delete the Subscriber and re-install. The install failed the same error as the screenshot.
I contacted TAC which pointed me to this BUG. He provided the workaround on the Publisher and I was able to complete the install.
I want to find out if this bug also affects 11.0.1 upgrades and NOT just for fresh install of Subscriber but for upgrades of the Subscriber as well?
If it does affect 11.0 and upgrades of subscriber, can we get this document and BUG updated to reflect this information?
Hello Deepak,
I'm currently upgrading one of our UCCX clusters from 10.6.1.11001-31 to 11.5.1.10000-61 and I'm hitting this error message on the subscriber:
09/24/2016 09:45:04 component_install|(CAPTURE) UCCX08_Post_install-8.0.1-1|<LVL::Debug>
09/24/2016 09:45:04 component_install|(CAPTURE) error: %post(UCCX08_Post_install-8.0.1-1.i386) scriptlet failed, exit status 1|<LVL::Debug>
I openned a ticket with TAC but I'm still waiting for them to contact me.
Can you explain what the workaround looks like ?
Regards,
Daniel
Got news from TAC and our issue is related to this bug.
We ran the root workaround and we're going to be able to finish the upgrade.
The installation is now.
Basically, the issue is that the publisher is not authorizing the subscriber to complete the installation.
There is no other way to fix this other than contacting TAC as the fix needs root access.
In prenvention, we applied the fix to our two other uccx clusters
Just to add to this thread, it seems that it is not only affecting 11.0 but 11.x. I performed a 10.6su1 to 11.5.1 upgrade and ran into the exact same bug. Again TAC needs to be involved. They gain root access and allow for publisher to recognize the subscriber and thus lets the upgrade complete successfully. Hope this helps
Please rate helpful posts
Tony
Cheers for Deepak. We had this issue but I found your post after TAC fixed the issue afterwards. I'll keep this in mind for the future :)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: