Cisco Jabber for Windows MSI Transformation failing via MS Orca
Trying to use MS Orca to edit the MSI file and add the configuration.
Getting Error Message that "This MSI contains at least one embedded substorage which cannot be copied to the new package. You will need to manually import these substorages into the new file."
Cisco Jabber for Windows using MS Orca to edit the property values
This issue happens due to certain components, that are in the MSI.
Orca is not capable of moving these components when using save as.
Create a copy of Jabber MSI file and rename it to any name you desire
Open MS Orca and then open the renamed fileScroll down and click on the "Property" Table under the Tables Column on left hand sideOnce Property Table loads on the right hand side, right click an "Add Row"; you can also do CTRL+R
Forwarded calls shows "Forwarded" instead of the display name for newly configured phones after upgrading the cucm from 10.5 to 11.5. CUMC version 11.5Call type internalPhone type 7945 Its working fine for existing phones with the same version o...
Hi, Refer to below BoM would you kindly guide with the right license for 3rd party IP Phone to sync with the existing infra.? Call Manager Hardware 21.0BE6M-M4-K9=Cisco Business Edition 6000M Svr (M4), Export Restricted SWN/A121...
Hello, We have CUCM Cluster on BE7K on 10K user OVA, there is a branch with existing seperate BE6K with 100 users. we are migrating the the 100 users to HQ Cluster and need local call processing. I though of 2 options for the Branch.1. 10K user ...
Hi All, I have issue with UCCX to transfer call, what simulation has been done are :1. Calling from internal to external number (phone number) via UCCX , result is success2. Calling from external (phone number) to external number (phone number) via U...
I am trying to configure a script that has a time of day component Building menus one for school hours and one for After hours During 8:00 am to 3:00 no teacher should get a phone call from a parent After 3:00 pm parents should be abl...