03-25-2011 07:40 AM - edited 03-14-2019 07:39 AM
We are licensed for 50 agents and only have 10 logged in at this time. Of the 10 agents 1 keeps fading from the Supervisor Screen. This happens whether the Agent is Ready or in Not Ready state. Has anyone ever experienced this issue.
Bill Adams
03-25-2011 08:15 AM
Hello Bill,
You will want to ensure that there is no firewall or anti-virus being run on the affected agents PC that could be blocking the ports used for CAD. I have provided the link to the port utilization guide for your review. You can test for blocked ports by telnet from the affected agents PC to the CRS server, and from the CRS server to the affected agents PC on the ports required. If you can, disable the Windows firewall on the affected agents PC via Windows services, and any anti-virus software.
From a command prompt on the CRS server, attempt to telnet to the affected agents PC on port 59020
telnet 10.x.x.x 59020
From a command prompt on the affected agents PC, attempt to telnet to the CRS server on port 59000
telnet 10.x.x.x 59000
Port utilization guide link starting with page 12
03-25-2011 08:39 AM
Aaron
My mistake we are running 7.0 (1) SR4ES2 not UCCX 5.0 (1) SR4ES2.
Bill
03-25-2011 10:06 AM
Hello Bill,
I have provided the link below for the port utilization guide for 7.0. You can still test via telnet to ensure that the ports are not being blocked as the same ports are used for 5.0 and 7.0.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide