I am using cistera convergence server for call recordings. For every recording, I am observing a beep sound before the recording starts and followed by exactly every 60 seconds. I didn't see any beep in live calls. This is only when I play the recording wav file.
Cistera support guys said there is no problem on their server end and suggesting to check in CCM/IVR.
I am not familiar with the recording system you use, but there is something in Call Manager that may be appropriate. This is often configured when you set up CUCM silent-monitoring for CTIOS.
Monitoring Notification Tone A monitoring notification tone can be configured using the Service Parameter Configuration page in the CCM Administration Interface. There are two entries:
Play Monitoring Notification Tone to Observed Target When set to true, this option will play the tone to the monitored party (usually an agent).
Play Monitoring Notification Tone to Observed Connected Target When set to true, this option will play the tone to the party to which the monitored party is talking (usually a customer).
A monitoring notification tone can be configured using the Service Parameter Configuration page in the CCM Administration Interface/ Select Server/ Select Cisco CallManger (active) for Service. Look for "Clusterwide Parameters (Feature - Monitoring"). If these are set to true, set them to false and see what happens. A CM restart may be required.
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...
To participate in this event, please use the button to ask your questions
Tour of the Real-Time Monitoring Tool
Have any questions about the Real-Time Monitoring Tool?
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to...
This event had place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees will learned how to use it to g...
The purpose of this document is to provide troubleshooting insight into a well-known issue for the IM&P nodes when going to the Presence Topology Page and seeing all the services as Unknown, even though they are started as shown on the ...