01-09-2017 01:22 AM
Hi experts,
Please advise me,
Our incoming call is connect to IVR. We want to know, how many users connected OUR IVR and how many click number 1 BUTTON, number 2 button etc.,
If you have any solution and any idea please share it.
many thanks.
01-15-2017 09:58 PM
Hi,
You can run the Detail call by call CCDR report to know the number of calls connected to IVR and the duration etc, however we currently don't have any out of box stock report for the DTMF.
Few customer have post call survey where they collect the DTMF pressed by the caller, please see this post on how you can collect these DTMF or what number they pressed via report in the following post.
Post call survey & Reporting in UCCX
Regards,
Ratish
01-16-2017 07:29 AM
Hi,
If option 1 and option 2 route to Sales Queue" "Customer Service Queue" e.g. for Sales Press 1, for Customer Service Press 2, you just need to create a two CSQs, and run a report against the CSQ.
e.g. a "Sales" CSQ and a "CustomerService" CSQ.
The Sales CSQ will be assigned the SalesSkill and the Sales agents will be assigned the Sales Skill and so get the correct calls. Similarly with Customer Service CSQ.
If the IVR does not route to a CSQ directly after option 1 and option 2, you could create a dummy CSQ, and then dequeue teh call and go to the next IVR and you can report on the dummy CSQ.
A dummy CSQ is a CSQ is a CSQ which has a skill which would not be assigned to any agents.
In summary, read and understand CSQs in the UCCX Administration and also review the CSQ reports in CUIC.
Gerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide