06-14-2012 04:45 AM - edited 03-14-2019 10:02 AM
Dear Team,
We have UCCE 8.5 deployed with CVP 8.5 in H323 comprehensive model.
We're planning to change the signalling method to use SIP in stead of H.323 and we will use CUSP (3925 With NM). (two CUSP for redendance).
I was hoping that you can help me with the CUSP configuration, since I could find an example of CUSP configuration.
Thank you.
06-14-2012 04:47 AM
Below the configuration of the GK, and how I see that should be done on the CUSP . do you have any remarks?:
H.323
---------------------------------------------
gatekeeper
zone local zone-default tt.tn 172.20.10.250
zone local zone-gateways tt.tn
zone local zone-cvp tt.tn
zone local zone-outbound tt.tn
zone prefix zone-default 1...
gw-type-prefix 4#* hopoff zone-outbound
gw-type-prefix 1#* hopoff zone-default default-technology
gw-type-prefix 2#* hopoff zone-cvp
gw-type-prefix 3#* hopoff zone-gateways
no shutdown
SIP PROXY
----------------------------------------------
conf t
sip network netA
end network
conf t
sip dns-srv
trigger condition in-netA
sequence 1
in-network netA
end sequence
end trigger condition
trigger condition out-netA
sequence 1
out-network netA
end sequence
end trigger condition
server-group sip group cvp.tt.tn netA
element ip-address 172.20.10.6 5060
element ip-address 172.20.10.7 5060
element ip-address 172.20.10.8 5060
element ip-address 172.20.10.9 5060
end server-group
server group sip group gateways.tt.tn netA
element ip-address 172.20.10.238 5060
element ip-address 172.20.10.240 5060
element ip-address 172.20.10.241 5060
element ip-address 172.20.10.242 5060
element ip-address 172.20.10.243 5060
element ip-address 172.20.10.244 5060
element ip-address 172.20.10.245 5060
element ip-address 172.20.10.246 5060
element ip-address 172.20.10.247 5060
element ip-address 172.20.10.248 5060
element ip-address 172.20.10.249 5060
end server-group
element group sip group outbound.tt.tn netA
element ip-address 172.20.10.239 5060
end server-group
server group sip group default.tt.tn netA
element ip-address 172.20.10.35 5060
element ip-address 172.20.10.36 5060
element ip-address 172.20.10.37 5060
end server-group
route table cvp-route-table
key * response 404
key 1# target-destination default.tt.tn netA
key 2# target-destination cvp.tt.tn netA
key 3# target-destination gateways.tt.tn netA
key 4# target-destination outbound.tt.tn netA
end route table
SIP GATEWAY
----------------------------------------------
dial-peer voice 2 voip
session target ipv4:SIP-Proxy@IP
protocol sipv2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide