02-26-2014 08:18 AM - edited 03-14-2019 01:09 PM
Hello!
I want to integrate UCCX 9.0.2 with SocialMiner 8.5(5). In "UCCX->Subsystems->Chat->SocialMiner Configuration" I try to set parameters for integration with Social Miner, but I get only "SocialMiner Status was red". I wrote HostName for SocialMiner unstead IP Address. My DNS works well and I don't have any problems with my network. After I filled gapes in "SocialMiner Configuration", I got message "SocialMiner has been configured and the data has been saved successfully.", but SocialMiner Status(Chat Feed, Campaign and Notification) is only red cross, although "CCX Chat Feed" was added in "SocialMiner->Configuration->Feeds" and "CCX Chat Campaign" was also added in "SocialMiner->Configuration->Campaign". Which typical problems I can have when I try to integrate SocialMIner and UCCX? How can I fix my problem?
Solved! Go to Solution.
02-26-2014 09:01 PM
Hi Mikhail, try to upgrade your SocialMiner to 9.0.1.10000-10, this because 8.5 is not supported in UCCX.
Please rate helpful answers.
Gabriel.
02-27-2014 06:53 AM
Mikhail, that chat is a standalone (Socialminer) service. I suggest to upgrade to Socialminer 9.0.1, to follow UCCX compatibility matrix guide, and if the issue persists, then it would be easier to work in the resolution from there.
A few days ago I configure UCCX 9.0.2 intregrated with Socialminer 9.0.1 without a problem, that is why I suggest you to do the same.
Please rate helpful answers.
HTH
Gabriel.
02-26-2014 09:01 PM
Hi Mikhail, try to upgrade your SocialMiner to 9.0.1.10000-10, this because 8.5 is not supported in UCCX.
Please rate helpful answers.
Gabriel.
02-26-2014 11:04 PM
Which version of UCCX does support web-chat in SocialMiner 8.5(5)? According to the
http://docwiki.cisco.com/wiki/SocialMiner_Release_8.5%285%29 SocialMiner 8.5(5) supports a chat. Where do I make a mistake?
02-27-2014 06:53 AM
Mikhail, that chat is a standalone (Socialminer) service. I suggest to upgrade to Socialminer 9.0.1, to follow UCCX compatibility matrix guide, and if the issue persists, then it would be easier to work in the resolution from there.
A few days ago I configure UCCX 9.0.2 intregrated with Socialminer 9.0.1 without a problem, that is why I suggest you to do the same.
Please rate helpful answers.
HTH
Gabriel.
02-28-2014 03:23 AM
OK. I installed SocialMiner 9.0.1. But I have other problem:
How can I fix this? What browser can I use?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide