I'm about to deploy IWAN App with APIC-EM on my legacy network, Currently My CE router connecting to MPLS Provider with QoS traffic shaping configured as show below.
!
time-range TR-MAIL-REP-WH
periodic weekdays 8:00 to 17:00
!
ip access-list extended MAIL-REP-DR-WH
remark ++ ACL for mail replicate at working hours ++
permit ip host 10.16.31.21 10.31.0.110 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.21 10.31.0.112 0.0.0.3 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.21 10.31.0.116 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.21 host 10.31.0.118 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.22 10.31.0.110 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.22 10.31.0.112 0.0.0.3 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.22 10.31.0.116 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.22 host 10.31.0.118 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.35 10.31.0.110 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.35 10.31.0.112 0.0.0.3 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.35 10.31.0.116 0.0.0.1 time-range TR-MAIL-REP-WH
permit ip host 10.16.31.35 host 10.31.0.118 time-range TR-MAIL-REP-WH
!
class-map match-all CMAP-MAIL-REP-WH
match access-group name MAIL-REP-DR-WH
!
!
!
!
ip access-list extended MAIL-REP-DR-AH
remark ++ ACL for mail replicate at after hours ++
permit ip host 10.16.31.21 10.31.0.110 0.0.0.1
permit ip host 10.16.31.21 10.31.0.112 0.0.0.3
permit ip host 10.16.31.21 10.31.0.116 0.0.0.1
permit ip host 10.16.31.21 host 10.31.0.118
permit ip host 10.16.31.22 10.31.0.110 0.0.0.1
permit ip host 10.16.31.22 10.31.0.112 0.0.0.3
permit ip host 10.16.31.22 10.31.0.116 0.0.0.1
permit ip host 10.16.31.22 host 10.31.0.118
permit ip host 10.16.31.35 10.31.0.110 0.0.0.1
permit ip host 10.16.31.35 10.31.0.112 0.0.0.3
permit ip host 10.16.31.35 10.31.0.116 0.0.0.1
permit ip host 10.16.31.35 host 10.31.0.118
!
class-map match-all CMAP-MAIL-REP-AH
match access-group name MAIL-REP-DR-AH
!
!
!
!
policy-map QoS-MAIL-REP-AH
description ++ QoS for mail replicate at after hours ++
class CMAP-MAIL-REP-AH
shape average 15000000
queue-limit 512 packets
class class-default
!
policy-map QoS-Policy
class CMAP-MAIL-REP-WH
shape average 5000000
queue-limit 512 packets
class class-default
bandwidth 10000
service-policy QoS-MAIL-REP-AH
!
interface GigabitEthernet0/1
description MPLS
bandwidth 50000
ip address 10.199.94.14 255.255.255.252
service-policy output QoS-Policy
!
After going through various Cisco published document i couldn't find any reference regarding traffic shaping neither EasyQos (both static or dynamic) nor IWAN App.
So does APIC-EM support Custom QoS traffic shaping on WAN edge device ?
Thank
Sedthanat